Choosing Upvc Window Replacement Hinges
It’s not as difficult as it could appear to choose and install Upvc replacement hinges. Make sure that the hinges’ arrows are facing the correct direction and determine the thickness of the hinge arms on the frame opening (13mm or17mm).
There are a variety of different kinds of hinges, each with their distinctive characteristics. This article will focus on the most popular types of uPVC window hinges and the advantages they offer.
Egress/Easy Clean Hinge
They are a great option for replacing or upgrading your fire escape safety windows because they can open to a full 90 degree angle. They can also be lowered to an ‘easy clean’ position so that you can easily access the exterior of your windows to clean them without the need to climb on a ladder or lean over at potentially hazardous angles.
These egress hinges are heavy-duty and are made by Yale which is among the most well-known and trusted home security brands on the market today. These hinges can be used with any kind of uPVC side hung window. They can be moved into the easy-clean position by pressing in the small button and sliding the window sash to one side. Once closed, the window sash will revert to its original position.
Both 13mm and 17mm are both available. Based on the size of your existing window, we recommend using our Egress Selection Guide to determine which one is the best fit for your needs.
These hinges can be used with traditional side-hung frames made from aluminum or uPVC. They come with a simple friction screw to alter the amount of resistance that is generated. This makes opening the window easier and reduces the chances of closing the window accidentally during high winds. They have been tested for more than 30,000 cycles, and comply with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.
There are no buttons or catches There are no buttons or catches. Nico Egress Easy Clean Friction Hinge is simple to operate and provides a simple solution for emergency egress and safe cleaning. First, open the door to the egress (full opening) position, then press the hinge retaining clip that is located on the inside of the bottom corner. This will release the top and bottom catches which will allow you to move the sash into the easy-clean position. Once it is in the easy-clean position close the window to return the hinges to their original position.
Fire-Escape Hinge
Fire Escape Hinges (also known as “Easy Clean”) are used to replace side-opening windows to protect against fire. These hinges permit a larger opening in the event of fire. Building regulations stipulate that this type of hinge should be placed in any space that is habitable and has a window.
They feature an exclusive friction stopper that allows the window to open at a 90 degree angle and allows the opening sash to slide across when open to allow easy cleaning of the external side of the glass window accessories friction stay hinge, without having to climb ladders. The hinges are easy to operate and don’t have complicated buttons or catch mechanisms. They can be operated from the inside of the home using a simple, safe lever.
The hinges, manufactured in the UK by Cotswold, come with the safety of children in everyday use. This can be overridden by a hidden button. You’ll be able to rest of assurance that your children won’t open the windows too far. They are available in 13mm or 17mm stack heights.
Find the length of the current side-hung window hinge that is fixed to the frame. (See the article on measuring upvc window hinges). Then select the correct size hinge from the choices below.
Please note that this measurement is taken at the part of the hinge that is attached to the frame and not the sash. The actual hinge length can be longer or shorter depending on the way your windows were made in the past. When deciding the size of the hinge, most frames made of upvc will have the 13mm stack height however if your original window frame has 17mm, you should select this option. You can also install the 4mm packer to make up for the difference. The hinges are available in two different directions (1 left and one right). The hinges do not include screws. These can be bought separately if required. We recommend using our Upvc window hinge repair screws. They are specially designed to improve the performance of your hinges, allowing them to operate efficiently for a longer. They feature a design with reduced friction and an enhanced weather seal that includes caps made of nylon.
Restricted Hinge
There are instances when windows must fully open and this can be difficult with a standard hinge. These child safety friction hinges are a fantastic solution to this problem. They can be used in situations where ventilation is needed but cleaning or escape from a fire is not possible. They limit the possibility of opening the sash, and permit the override of this limitation by pressing a button. They are available in 13mm and 17mm stack heights. They can be used for both side and top hung windows.
The Nico Restricted Egress Hinges combine the advantages of a standard restrictor and an escape pivot to provide a simple and efficient way to meet building regulations. It is available in 13mm or 17mm stack heights and can be used on the top and side openings of uPVC pvc window hinges. It is available as a pair where one hinge is the restricted egress, the other unrestricted allowing one of these to be installed on the bottom of the sash whilst the other is fitted to the top.
These uPVC restrictive hinges have been tested to BS6375, part 2 and are designed for use on a window that cannot be opened fully like a small children’s bedroom. The mechanism limits how far the sash opens up to a safe position of 100mm and then re-engages when the window is closed.
As with the other types of uPVC friction hinges that are available, these hinges can be used on all styles of windows and are perfect for difficult to reach windows above the ground level three-storey flats and those that typically require a ladder for access to them. They can be complemented with our range of security features like hinge guards, protection plates for hinges or dog bolts to offer PAS 24 performance.
It is essential to measure the hinges on your window in order to get replacements of the same size. This can be accomplished by looking at the picture gallery of the hinge before deciding the best place to put it. Top hung hinges are restricted to both sides and side hung hinges can only be used to one side.
Standard Hinge
Standard hinges have metal-to-metal contacts and do not require any additional parts to help reduce friction. It’s available in a variety of finishes and fire-rated. To determine the radius of your hinge lay it flat and align with a quarter and dime in two corners. If the quarter fits better than the corner, then it should be round to 5/8 inches.
The right hinge can determine the success or failure of your door’s appearance. It’s essential to match the style and finish of your door to the hinges to create a unified appearance that is both practical and visually appealing.