Add a Sparkle to Your Fiat 500 Key Fob
These cute silicone covers will add a little excitement to your Fiat 500 Key fob. These covers are easy to install, and simply snap over your black cover.
The silicone covers shield your car keys from splashes and dust. They also make your key appear more stylish. The remote control’s signals are not affected and continue to work even when the cover is on.
Protect your key from dust, splashes and other contaminants
Add a little flair to your key by using this silicone cover. It perfectly fits around the key fob, without loosing. It shields your key from splashes and dust. The silicone cover will not affect the signals that are sent by your key remote, so you can use the keys fob buttons just as you would normally.
Accessorize your Fiat 500 with these funky covers in Grey and Black. They are great if your original key cover is starting to appear shabby, scratched or scratched. The covers are made from high-quality silicone and come with two key rings, so they can be swapped out to change colours if you’re bored of one colour.
These covers replace the stock, black key cover that is on your car. These covers will not fit if you already have the original key cover installed.
Great look!
fiat panda replacement key is a unique and iconic Italian brand and their cars have an incredible style that sets them apart from the crowd. These stylish key covers are a great and easy option to add a touch of glamour to your car keys without being overbearing. They look amazing on your key fob and can be used to refresh the look of a worn-out key.
The covers snap easily into place and are designed to replace your black cover. It is recommended to take off the original cover prior to installing the new one.
They are available in Grey and black, and the fiat keys logo is printed on both. You can always change it in the future if you wish! These are also great gifts for Program Fiat 500 Key Fob 500 drivers.
Easy to install
Fiat 500 key covers can be a great method to upgrade your keys. You can pick from a variety of colors and styles to find the one that is most appropriate to your personality. You can install them yourself in ten minutes. You’ll only need an electric screwdriver and a bit of patience. The first step is to remove the previous cover from your key. The original cover must be removed prior to the replacement is able to be installed.
After removing the old cover After removing the cover, you can use a flathead to pry the four main attachment clips from the passenger side of fob assembly. They are marked in red on the image below. Also note the tabs that locate slots shown in yellow that need to be disconnected as well.
After removing the battery, replace it with a new CR2032 3 volt coin cell battery. Make sure that the “+” positive side of the battery corresponds to the opening of the fob, and that the”-” negative side is facing towards the rubber buttons.
Re-attach the passenger side mirror cover by aligning the locating tabs. Once you’ve done that then put the fob on the driver’s side back in your car and test it. Press the push button on the front of the key. If everything is working properly the car should turn on the parking lights and your doors will automatically lock.
Easy to remove
fiat remote key 500 Key Covers can be an excellent way to upgrade your key fob. They’re easy to put on and give a unique look. They also shield your key fob from scratches and smudges. To replace the cover, you’ll first need to remove the old one from your vehicle.
It is as easy as pressing the red “Fiat” button located on the front of your key fob. Pressing the button will open the lever that allows you to remove the key ignition switch made of steel (1). After removing the key, you will see the small silver-colored round switch that has images of a locked and unlocked padlock next to it. This is the battery switch for the key fob. It is simple to change the battery by turning the switch half turn with an inexpensive screwdriver that is flat.
The key fob houses an embedded microchip that communicates with the Body Control Module. When you insert the key in your Fiat vehicle, it presses an ignition switch, which functions as an “key-in-ignition” reminder. The BCM will then be able to read the transponder on the key fob and confirm that it’s genuine.
You can also get the twin pack designed for sport for a fun, unique design to your key covers. The covers snap in place over your existing cover and are available in Cream and silver. The key cover only works in the event that you remove the black cover from your key fob.