Choosing Upvc Window Replacement Hinges

It’s not as difficult as it may appear to select and install Upvc replacement hinges. Check that the hinges’ arrows face in the correct direction, and measure the thickness of the hinge arms on the opening frame (13mm or 17mm).

There are several different types of hinges, each having their distinct characteristics. This article will go over some of the most commonly used uPVC hinges, and their advantages.

Egress/Easy Clean Hinge

They are an excellent choice to replace or upgrade windows for fire escapes, as they are able to open at a 90-degree angle. They can be closed to an easy-clean position that allows you to see the outside of windows without the need to climb ladders or lean at risky angles.

These heavy-duty egress hinges are manufactured by Yale, one of the most known and respected home security brands on the market today. They are suitable for all kinds of uPVC side-hung windows. They can be moved to the easy-clean position by pressing a small button and then sliding the window sash over to one side. When the sash is closed, it will automatically return to its original operative position.

They are available in both 13mm and 17mm stack heights. Make use of our Egress Selection Guide to help you determine the best product for your window.

The hinges are designed to be used with standard side-hung frames that is made of aluminium or uPVC. They are fitted with a simple friction screw to adjust the amount of resistance generated. This allows for easier opening of the window and reduces the risk of a mishap during high winds. They have been tested for more than 30000 cycles and are in compliance with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.

With no buttons or catches There are no buttons or catches. Nico Egress Easy Clean Friction Hinge is simple to use and provides a convenient solution for emergency egress and safe cleaning. Use the hinge retention clip located on the inner corner of the bottom corner. This will release the bottom and top catches, allowing you to slide the sash into an easy-clean position. Once in the easy-clean position close the window to return the hinges to their egress positions.

Fire-Escape Hinge

Fire Escape Hinges commonly referred to as “Easy Clean” hinges are used to replace windows that open sideways for egress (fire safety) reasons. These kinds of hinges for windows open wider and faster than normal hinges, allowing an open space to escape in the event of an emergency fire. Building regulations require that this type of hinge must be installed in any room that has a window.

They have an exclusive friction stopper that allows the window to open at 90 degrees and also allows the sash opening to slide across when it is open to allow easy cleaning of the exterior side of the glass without needing to use ladders. The hinges aren’t flimsy buttons or catches, and are operated with an easy, secure lever that is accessible from the inside of your home.

The hinges are manufactured in the UK by Cotswold and come complete with a child safety restraint for use throughout the day which can be turned off with a hidden button, providing you with peace of mind that your children won’t accidentally open the window too far. They are available in 13mm and 17mm stack heights.

Find the length of the current side-hung window hinge that is attached to the frame. (See the article on measuring the size of Upvc window hinges). Select the correct size hinge from the list below.

It is important to note that this measurement is taken from the hinge’s part that is attached to the frame and not the sash. The actual hinge length could be shorter or longer dependent on how the windows were made in the past. Also, when choosing the size of your hinge, most upvc windows will fit a 13mm stack height. However, should your window frame has 17mm, then select the option to use this. Alternatively you can fit the 4mm packer to make up the difference. The hinges are available in two different directions (1 left and one right). Screws aren’t included with the hinges. They can be purchased separately if needed. Our upvc window repair screws are highly recommended. These screws are designed to improve the performance of your hinges and allow them work smoothly for longer. They feature a less friction design and a better weather seal that is fitted with a new nylon reducer cap.

Restricted Hinge

Standard hinges can make it difficult to open windows fully. These restricted child safety friction hinges can help overcome this problem and offer a fantastic solution for situations where ventilation is required but access for cleaning or escape in the case of fire is not possible. They limit the possibility of opening the sash, and allow for the bypass of this limitation by pressing the button. They are available in 13mm or 17mm stack heights and are suitable for both side and top hung windows.

The Nico Restricted Egress Hinges combine the benefits of a standard restrictor and a fire escape pivot to provide a simple and effective way to comply with building regulations. It is suitable for side hung and top opening uPVC windows and is available in 17mm and 13mm stack heights. It is supplied as a pair of hinges where one hinge is restricted egress, the other free, allowing one to be fitted to the bottom of the sash while the other is attached to the top.

These uPVC restricting hinges have been tested to BS6375 Part 2 and are designed to be used on windows that cannot be fully opened like a small child’s bedroom. The mechanism limits the amount the sash is able to open to the safety level of 100mm and re-engages once the window is closed.

These uPVC friction-type hinges can be used with any type of windows. They are especially useful for windows that are hard to reach, such as those in three-storey houses or those that require a ladder. They can be combined by our security enhancements like hinge guards and protection plates, or dog bolts to offer PAS 24 performance.

It is essential to measure the hinges on your window in order to get replacements of the same size. This can be accomplished by looking at the image gallery of the hinge before deciding where you want it positioned. Top-hung hinges for upvc doors are limited to both sides and side hung hinges can only be used on one side.

Standard Hinge

A standard hinge uses metal-to-metal contact, and there are no additional parts to reduce friction. It’s available in a variety of finishes and is also fire rated. For a quick way to determine the radius of your hinge, lay it flat and then line up a dime and quarter in two corners. If the dime fits better and the corner is round by 1/4 inch. If the quarter fit better, it’s rounded by 5/8 inch.

The hinge you choose can enhance or ruin the appearance of your door hinge repair. Matching the style and finish of your hinges with your door hinge repair will create a cohesive and attractive look.

Leave a Reply

Your email address will not be published. Required fields are marked *